English

PRODUCTS

2800KN Rubber Horizontal Injection Molding Machine

Plastic Injeciton Molding Machine

Plastic Injection molding equipment consists of plasticizing system, injection system, the clamping system and transmission system. Our company has been applying die casting technologies to injection molding machines for many years, like in mechanical, hydraulic, electric control, etc for comprehensive improvement, perfect combination of dynamic pressure casting and speed.

In order to improve the stability of syringe production, we specially add infrared heating coil to standard injection molding machine. In addition, we recommend adding servo motor system, has the advantages of energy saving, in a long term production, it is more economic, so nowadays more and more companies choose servo motor system.

Plastic Injeciton Molding Machine

Plastic Injection molding equipment consists of plasticizing system, injection system, the clamping system and transmission system. Our company has been applying die casting technologies to injection molding machines for many years, like in mechanical, hydraulic, electric control, etc for comprehensive improvement, perfect combination of dynamic pressure casting and speed.

In order to improve the stability of syringe production, we specially add infrared heating coil to standard injection molding machine. In addition, we recommend adding servo motor system, has the advantages of energy saving, in a long term production, it is more economic, so nowadays more and more companies choose servo motor system.

Previous: Medical Plastic Project 6.5Ton Injection Molding Machine

Next: High Precision Medical Product Components Injection Molding Machine

SEND INQUIRY

Product Category

Film Blowing Machine

Plastic Bag Making Machine

Vest Bag

Side Seal Bag

Bottom Seal Bag

Bags On Roll

Paper Bag Making Machine

Printing Machine

Recycling Machine

Slitting Machine

Injection Machine

1. High Clamping Force

Hydraulic or servo-toggle clamping system from 50 to over 3,000 tons.

2. Precision Injection Unit

Double-cylinder or screw-plunger design for accurate shot control (±0.1g).

3. High-Screw Plasticizing

Optimized screw geometry for fast melting and uniform melt temperature.

4. Energy-Saving Servo Pump

Variable-frequency drive reduces power consumption by 30–60% vs. fixed pumps.

5. Multi-Stage Injection

5–10 stage injection pressure and speed control for complex parts without flash.

6. Fast Mold Protection

Low-pressure mold protection with intelligent response to prevent mold damage.

7. User-Friendly Controller

Touchscreen with 100+ mold recipes, real-time monitoring, and self-diagnostics.

8. Rigid Toggle Linkage

Long-life, low-maintenance toggle mechanism for stable, repeatable clamping.

Part	Name	Unit	NT280
Injection Unit	SCREW DIAMETER	mm	55	60	65
	SCREW L/D RATIO	L/D	23	21	19
	INJECTION STROKE	mm	285	285	285
	NJECTION SPEED	Mm/sec	94	94	94
	SHOT VOLUME(THEORETICAL)	CM3	677	805	945
	INJECTION WEIGHT(PS)	g	616	732	860
	INJECTION PRESSURE	Mpa	202	170	145
	INJECTION RATE	cm³/sec	223	265	312
	SCREW SPEED	rpm	210
Clamping Unit	CLAMP FORCE	Kn	2800
	OPEN STROKE	mm	590
	SPACE BETWEEN TIE BARS	mm×mm	615X615
	MAX.MOULD HEIGHT	mm	630
	MIN.MOULD HEIGHT	mm	200
	EJECTOR STROKE	mm	135
	EJECTOR FORCE	Kn	70
	EJECTOR NUMBER	N	9
Others	MAX.PUMP PRESSURE	Mpa	16
	SEVRO DRIVE POWER	Kw	37
	HEATING POWER	Kw	18.5
	MACHINE DIMENSION(LWH)	m×m×m	6.351.72.35
	MACHINE WEIGHT(ESTIMATE)	T	9.3

Part	Name	Unit	NT280
Injection Unit	SCREW DIAMETER	mm	55	60	65
	SCREW L/D RATIO	L/D	23	21	19
	INJECTION STROKE	mm	285	285	285
	NJECTION SPEED	Mm/sec	94	94	94
	SHOT VOLUME(THEORETICAL)	CM3	677	805	945
	INJECTION WEIGHT(PS)	g	616	732	860
	INJECTION PRESSURE	Mpa	202	170	145
	INJECTION RATE	cm³/sec	223	265	312
	SCREW SPEED	rpm	210
Clamping Unit	CLAMP FORCE	Kn	2800
	OPEN STROKE	mm	590
	SPACE BETWEEN TIE BARS	mm×mm	615X615
	MAX.MOULD HEIGHT	mm	630
	MIN.MOULD HEIGHT	mm	200
	EJECTOR STROKE	mm	135
	EJECTOR FORCE	Kn	70
	EJECTOR NUMBER	N	9
Others	MAX.PUMP PRESSURE	Mpa	16
	SEVRO DRIVE POWER	Kw	37
	HEATING POWER	Kw	18.5
	MACHINE DIMENSION(LWH)	m×m×m	6.351.72.35
	MACHINE WEIGHT(ESTIMATE)	T	9.3

Q1: Short shot (incomplete filling). Causes?

Q2: Flash (burrs). How to remove?

Q3: Machine won’t start or stops suddenly. What to do?

Q4: Hydraulic oil leak or high temperature. How to handle?

Q5: Daily maintenance essentials?

A: Machine capacity too small, material bridging in hopper, nozzle blockage, or low melt temp. Increase capacity, clear hopper, clean nozzle, raise temp

Related Products

Injection Machine

2025-04-21

Features and Uses:

NT120m Newly China Hot Sale Desktop Small Injection Moulding Machine for Moulding Machine Plastic Injection

2025-04-21

Plastic Injeciton Molding Machine Plastic Injection molding equipment consists of plasticizing system, injection system, the clamping system and transmission system. Our company has been applying die casting technologies to injection molding machines...

6300KN Thermoplastic PVC Injection Molding Machines

2025-04-21

Plastic Injeciton Molding Machine Plastic Injection molding equipment consists of plasticizing system, injection system, the clamping system and transmission system. Our company has been applying die casting technologies to injection molding machines...

NT140max Manufacturer Injection Molding Machine PP Plastic Moulding Machine Plastic Injection Machine

2025-04-21

Plastic Injeciton Molding Machine Plastic Injection molding equipment consists of plasticizing system, injection system, the clamping system and transmission system. Our company has been applying die casting technologies to injection molding machines...